Mule Deer Shed Antler Mount Kit | Rack Master

The Rack Master is a 3D-printed skull mount built for mule deer, with the wider nasal structure and pedicle spread that match a mule's heavier skull.

Mule deer skulls are noticeably broader through the nasal cavity than whitetail, and their racks fork rather than branching off a single main beam. Put a mule deer rack on a whitetail-cut mount and the proportions read wrong immediately. The Rack Master is built to mule deer geometry.

HOW THE BULLET LOCK WORKS

Two Bullet Lock connectors thread directly into the base of each antler. Interlocking gear teeth inside the skull's sockets let you rotate each antler independently and lock it at the angle you want. Mule deer racks are wide and heavy, so getting both sides sitting at matching angles is what keeps a big frame from looking lopsided on the wall. If it's not right, back it out and reset it. No glue, no permanent commitment.

Because the connectors screw into the antler itself, the system works the same for a naturally shed antler and one cut from a harvested buck.

WHAT'S INCLUDED

• 1x Rack Master mule deer skull mount
• 2x Bullet Lock connectors
• 2x #10 x 1.5" mounting screws
• 2x 6M locking washers
• Installation guide card

WHAT YOU'LL NEED

A saw to cut the antler bases flush, a drill with a 1/8" bit, and a driver. Plan on about 30 minutes start to finish. Full step-by-step instructions are in the installation guide.

ABOUT MULE DEER SHEDS

Mule deer typically drop in February and March, and because they winter in concentrated areas, sheds tend to pile up in predictable country. Shed hunters working western winter range often find multiple sets in a season, which is why mule deer sheds are more likely than most to come in matched pairs.

A mature mulie's fork structure makes year-over-year comparison straightforward. The main fork spread and the depth of the back fork are usually the first places extra growth shows up.

COMPARED TO A TAXIDERMIST EURO MOUNT

A traditional euro mount means boiling or beetling a real skull, degreasing, whitening, and mounting it. Done professionally that runs $200 to $300 and takes weeks. The Rack Master is $69.99, ships in 24 hours, and works with sheds, which matters when you don't have the skull at all.